Customers of services and products

Manufacturing and delivery of four complete sets of the analogue heat-pressure resistant borehole instrumentation for the investigation of open hole of the oil and gas boreholes.

Manufacturing and delivery of four complete sets of the digital, heat-pressure resistant borehole instrumentation for the investigation of open hole of the oil and gas boreholes, 30 borehole inclinometer apparatuses, five complete sets of sonic logging tools Ø48 mm (SonicLog/BHC), four complete sets of tools for a well perforating control.

Manufacturing and delivery of 20 Caliper/CAL to measure the four borehole radiuses and diameter, and also 12 complete sets of Microlog/ML.

Manufacturing and delivery of 20 complete sets of acoustic log equipment Ø73 mm (SonicLog/BHC), 10 complete sets of radioactivity logging equipment (Gammalog/GR and Compensated Neutron-Neutron Log/CNL).

Manufacturing and delivery of eight complete sets of borehole neutron generators and spare parts for borehole instrumentation.

Manufacturing and delivery of the package of radioactivity logging (Gamma Log/GR and Compensated Neutron-Neutron Log/CNL), of the Microlog/ML, spare parts for the borehole equipment.

Manufacturing and delivery of sonic logging tools Ø48 mm (Sonic Log/BHC), calipers Ø73 mm (Caliper/CAL) and induction logging tools Ø73 mm.

Carrying out of 3D seismic surveys in amounts of 100 sq km in the eastern oil and gas region of Ukraine (Pokrovska area) under the control of a supervisor of the international service company; Processing and interpretation of 100 sq km of 3D seismic data.

Provision of services to digitize wireline logs on oil and gas wells using special software.

Provision of consulting services on the evaluation of gold ore fields.

Test processing of 3D seismic data (Supsa Shromisubani area).

Organisation of joint venture for the performance of projects, which show new opportunities on the positive impact on a state of environment and counteractions to climate changes.

Test processing of 3D seismic data in the amount of 24.4 sq km within the Jaisalmer oil field.

Test processing of 2D seismic data in amounts of 15 linear km within prospective oil and gas bearing Tripula block.

Test processing of 3D seismic data in amounts of 162.28 sq km of the prospective oil and gas bearing Kadi-Sanand area.

Manufacturing and delivery of component parts to the drilling rig on an offshore platform (mast, crown block, traveling block with load-carrying capacity of 1000 tons).

Manufacturing and delivery of downhole geophysical instrumentation for the investigation of open hole of oil and gas wells, and also spare parts.

Provision of services on a Dipmeter/DipLog for oil and gas boreholes (determination of bedding angle and stratum debouchment).

Manufacturing and delivery of a well-logging instrumentation to investigate the open hole of wells, and also spare parts to the microlog instrumentation (Microlog/ML) and calipers (Caliper/CAL).

Manufacturing and delivery of acoustic logging equipment Ø73 mm (SonicLog/BHC) and spare parts.

Manufacturing and delivery of the stationary drilling rig (model: SL2500T-AC-T) with a lifting capacity of 600 tons.

Performance of expert revaluation of hydrocarbon reserves of fields in the eastern and western oil and gas regions of Ukraine.

Performance of economic-geological evaluation of hydrocarbon reserves of fields within the western oil and gas region of Ukraine (Uzhhorodske (2005), Korolivske, Stanivske (2006), Rusko-Komarivske (2009).

Conducting field 2D seismic surveys in amounts of 95 linear km in the eastern and western oil and gas regions of Ukraine (areas: Uzhhorodska, Pivnichno-Makiivska); Processing and interpretation of 95 linear km of 2D seismic data.

Conducting field 3D seismic surveys in amounts of 800 sq km in the eastern and western oil and gas regions of Ukraine, including in remote mountain conditions (7 areas: Russko-Komarivska, Stanivska, Kriakivska, Oskolonivska, Zakhidno-Verhunivska, Olhivsko-Makiivska, Pivnichno-Makiivska); Processing and interpretation of 800 sq km of 3D seismic data.

Manufacturing and delivery of the cluster drilling rig (model: PR1500T-AC-W) with a lifting capacity of 350 tons.

Provision of consulting services on the evaluation of gold ore fields.

Provision of consulting services on the estimation of gold ore basins in separate regions of Mongolia.

Manufacturing and delivery of the stationary drilling rig (model: SL2500T-AC-T) with a lifting capacity of 600 tons (delivery to Nigeria).

Preparation of materials following the results of investigations of a geological structure Ke areas (Nigeria) within a land.

Provision of geological services on the analysis of explored and remaining reserves of hydrocarbons in a Dnieper-Donets Depression of Ukraine.

Analysis of the gas market of Ukraine.

Provision of geological services on the definition of hydrocarbon shows and the characteristics of formations of prospective oil and gas bearing facilities of transitive zones of the Dnieper-Donets depression in Ukraine according to the data of borehole well logs.

Conducting field 2D seismic surveys in amounts of 438 linear km in the eastern oil and gas region of Ukraine (Pavlivsko-Svitlivska area). Processing and interpretation of 438 linear km of 2D seismic data.

Review of issues on a coalbed methane in a Donbass Region.

Conclusion of a three year contract on performance of field 2D seismic surveys in amounts of 2500 linear km on a Yuzivskyi blocks (Ukraine).

Manufacturing and delivery of the equipment for purification of drilling fluid.

Carrying out of a complex of geophysical explorations and perforating works in more than 20 oil and gas boreholes (Ukraine).

Manufacturing and delivery of the mobile drilling rig (model: CA750D-M-T) with a lifting capacity of 125 tons.

Manufacturing and delivery of a jack-up installation with a lifting capacity of 350 tons.

Manufacturing and delivery of the stationary drilling rig (model: SL2000T-AC-T) with a lifting capacity of 450 tons.

Manufacturing and delivery of rigs for carrying out the workover.

Conducting seismic surveys in 3D technology in quantity of 40 sq km in the eastern oil and gas region of Ukraine in densely populated and industrial areas (Myhrynska area); Processing and interpretation of 40 sq km of 3D seismic data.

Drawing up the two passports of oil and gas promising facilities, prepared for deep drilling.

Building-up of the total predicted reserves (3.5 bln cubic m of gas) due to the performed exploration work.

Organisation and implementation of the programme of joint elaboration and delivery of the modern Induction Log/IL, Sonic Log/BHC, Acoustic Cement Bond Log Sonde, Electromagnetic Log/EL, Caliper/CAL, Gammalog/GR and Compensated Neutron-Neutron Log/CNL.

Manufacturing and delivery of the package of geophysical instrumentation for the investigation of an open hole of oil and gas boreholes and also spare parts for downhole instrumentation.

Elaboration and implementation of the programme of delivery of products and participation of the Ukrainian enterprises and organisations in developing the western-Siberian oil and gas complex and the Tyumen region in exchange for counter-deliveries of oil to Ukraine (Decree of the Cabinet of Ministers of Ukraine, from February, 27th 1993. # 139).

Elaboration and implementation of the programme of delivering products with participation of 98 Ukrainian research, design, service and industrial enterprises to the Russian enterprises of the RAO «Gazprom», SE «Rosneft» and other gas and oil producing association, which exported natural gas and oil to Ukraine (Decree of the Cabinet of Ministers of Ukraine, from March, 5th 1994. N152).

Elaboration and implementation of the programme of delivery of products and services from the Ukrainian enterprises to the gas and oil producing enterprises and organisations of western Siberia and Bashkortostan on account of counter-deliveries of oil from the Russian Federation (Decree of the Cabinet of Ministers of Ukraine, from April, 28th 1994. #265).

Provision of a package of logging services on the hydrocarbon fields in western Siberia.

Manufacturing and delivery of the radioactivity logging equipment (Gamma Log/GR and Compensated Neutron-Neutron Log/CNL).

Manufacturing and delivery of rigs for carrying out the workover.

Manufacturing and delivery of the gyroscopic inclinometers (Deviaton Log/INKL).

Manufacturing and delivery of the geophysical instrumentation and spare parts to conduct well-logging operations.

Manufacturing and delivery of the geophysical instrumentation and spare parts to conduct well-logging operations.

Manufacturing and delivery of the package of geophysical instrumentation for investigation of boreholes and also spare parts.

Manufacturing and delivery of the geophysical instrumentation and spare parts to conduct well-logging operations.

Manufacturing and delivery of spare parts for downhole equipment to conduct geophysical studies in wells.

Manufacturing and delivery of spare parts for downhole equipment to conduct studies in wells.

Design, manufacture and delivery of the «Stress Sensor» and centralizer of spring type.

Design, manufacture and delivery of microlog equipment (Microlog / ML).

Provision of services by means of a hardware-methodical complex of wave acoustic logging for control over hydraulic fracturing.

Joint elaboration and fabrication of geophysical instruments for conducting research in wells.

Manufacturing and delivery of a hardware-methodical complex of wave acoustic logging (Full Wave Sonic/LSS).

Manufacturing and delivery of tools for conducting sonic logging (Sonic Log/BHC).

Manufacturing and delivery of spare parts to a geophysical instrumentation for a performance of well-logging operations.

Manufacturing and delivery of equipment for conducting exploration in the open and closed bores of oil and gas boreholes.

Manufacturing and delivery of spare parts to a geophysical instrumentation for a conducting exploration in oil and gas boreholes.

Manufacturing and delivery of four complete sets of a Microlog/ML downhole instruments.

Manufacturing and delivery of rigs for carrying out the workover.

Manufacturing and delivery of more than 300 measurement units to the microlog instrumentation (Microlog/ML), calipers (Caliper/CAL) according to the customer’s engineering documentation, and also spare parts to them.

Manufacturing and delivery of a geophysical instrumentation complex of wave acoustic logging (Full Wave Sonic/LSS), Microlog tools (Microlog/ML) and calipers (Caliper/CAL).

Manufacturing and delivery of five complete sets of geophysical instrumentation to conduct explorations in the open hole of wells.

Manufacturing and delivery of the geophysical instrumentation and spare parts to conduct well-logging operations.

Manufacturing and delivery of two cluster drilling rigs (model: PR1500T-AC-W) with a lifting capacity of 350 tons (for operation in the far north of Russia).

Manufacturing and delivery of spare parts to the tools to perform the well-logging operations.

Purchase of perforating systems and joint perforation in Ukraine.

Implementation of forecasting projects, an estimation of oil and gas bearing potentials of territories and a choice of licence areas within the western region of Ukraine for the exploration and production of hydrocarbons.

Development and implementation of work programmes together with the local cell self-government and population concerning consequences of exploration and production of a shale gas in western Ukraine.

Provision of professional services.

Overview of the natural gas market in Ukraine.

Detailed analysis of the residual potential of hydrocarbons in Dnieper-Donets basin of Ukraine.

Execution of works on assessment of the hydrocarbon potential of transit areas in the southern region of Ukraine.

Detailed analysis of the residual potential of hydrocarbons in the western region of Ukraine.

Project performance on the study of the geological structure and estimation of oil and gas producing potentials of an Azov Sea aquatic area.

Implementation of projects on forecasting, assessment of oil and gas producing potentials of overland territories and water areas of the Black and Azov seas as well as elaboration of programmes of a geological examination of the licence subsoil areas of Ukraine.

Performance of projects on forecasting, an estimation of oil and gas producing potentials in water areas of the Black and Azov seas and a choice of licence blocks for an oil and gas exploration and production.

Provision of geological services on carrying out of the detailed analysis of the selected geological structures in Ukraine.

Manufacturing and delivery of spare parts to the geophysical instrumentation for conducting exploration in oil and gas boreholes.

Manufacturing and delivering tools of ultrasonic (Sonic Log/BHC), electrical (Electromagnetic Log/EL), radioactive (Gamma Log/GR) and (Compensated Neutron-Neutron Log/CNL) well logs.

Manufacturing and delivery of instrumentation for conducting exploration in the closed bores of oil and gas boreholes.

Manufacturing and delivery of punched tapes.

Manufacturing and delivery of two stationary drilling rigs (model: SL2500T-AC-T) with a lifting capacity of 600 tons (designed for the desert climate).

Scientific and technical co-operation to improve the efficiency and quality of performing the demonstration, research and developmental projects through the sharing of geophysical equipment and computer technology.

Production and delivery of 30 sets of downhole instrumentation to conduct research in the open hole oil and gas wells.

Manufacturing and delivery of 10 complete sets of geophysical neutron generators to conduct explorations in the cased-hole of oil and gas wells.

Analysis of the gas market in Ukraine.

Provision of geological services on the analysis of explored and remaining reserves of hydrocarbons in a Dnieper-Donets basin of Ukraine.

Performance of projects on forecasting, estimation of oil and gas producing potentials of territories of land and water areas of the Black and Azov Seas, a choice of licence blocks for oil and gas exploration and production in the Western oil and gas region of Ukraine.

Acquisition and analysis of 2D vibroseis data in amounts of 2700 linear km on a massif of the Doseo and Salamat basins, located in Central African Republic.

Data collection and choice of the licence areas, estimation of a resource potential of all kinds of mineral resources in territory of Iran.

Carrying out of 3D seismic exploration works in amounts of 26 260 sq km within three prospective blocks: Lake Chad, Chari South, Chari West.

Conducting detailed analysis of selected geological structures in Ukraine.

Implementation of projects on forecasting, assessment of oil and gas producing potentials of overland territories and water areas as well as elaboration of programmes of a geological examination of the licence subsoil areas of Ukraine.

Re-processing and re-interpretation of 2D seismic data in amounts of 7.4 linear km (Strilnykivska area, Ukraine). Growth of the total predicted resources amounted to 657 mln cub. m of gas.

Manufacturing and delivery of the geology-prospecting equipment and carrying out of repair works.

Data collection, analysis, processing and interpretation of 3D seismic data (Kubashivska area, Ukraine).

Conducting field 3D seismic surveys in amounts of 171 sq km; Processing and interpretation of 171 sq km of 3D seismic data.

Conducting the project of borehole seismic survey.

Conducting geophysical explorations in open holes of more than 15 oil and gas boreholes and perforations in more than 10 wells.

Conducting field 3D seismic surveys in amounts of 170 sq km. Processing and interpretation of 170 sq km of 3D seismic data.

Manufacturing and delivery of the mobile drilling rig (model: CA750D-M-W) with a lifting capacity of 136 tons.

Manufacturing and delivery of mobile housing units of various types according to the customer’s technical specifications.

Manufacturing and delivery of autonomous borehole manometers-thermometers.

Manufacturing and delivery of 12 mobile housing units.

Manufacturing and delivery of the reverse-acting valves and core breakers.

Creation of permanent geological and hydrodynamic model of hydrocarbon deposits.

Carrying out of a complex of geophysical explorations in the open holes of more than 10 oil and gas boreholes.

Creation of permanent geological and hydrodynamic model of hydrocarbon deposits based on the results of detailed high-resolution 3D seismic surveys and re-interpretations of data from wells by means of the modern software packages.

Organisation, carrying out and technological support of the first Ukrainian licensing round of oil and gas blocks within water areas of the Black and Azov seas.

Carrying out of 2D seismic surveys using a CDP method within a Dnieper-Donets depression (DDD) in Ukraine in a total amount of 984 linear km (4 areas: Kostiantynivska area (2007), Vodianivska (2009), Zinkivska (2011), Krasnopavlivska (2011)); processing and interpretation of 984 linear km of CDP method 2D seismic data.

Performance of projects under the analysis of risks during the search and exploitation of hydrocarbon field in the western and eastern regions of Ukraine.

Development of technical documentation for the production of modern downhole instruments for the study of ore wells.

Elaboration, manufacture and delivery of a complete set of the logging system and borehole instrumentation for investigation of ore wells.

Processing and interpretation of 2D seismic survey data in amounts of 4891 linear km on four licence areas within the Ukrainian water area of the Black and Azov seas.

Manufacturing and delivery of borehole neutron generators and spare parts for borehole instrumentation.

Manufacturing and delivery of packages of the industrial and geophysical instrumentation.

Manufacturing and delivery of borehole manometers-thermometers, self-powered and with non-volatile memory.

Conducting integrated geophysical explorations in open holes of more than 30 oil and gas boreholes and perforation work in more than 30 wells.

Manufacturing and delivery of sonic logging tools (Sonic Log/BHC), electric (Electromagnetic Log/EL), radioactive logging (Gamma Log/GR, Compensated Neutron-Neutron Log/CNL) and spare parts for borehole equipment.

Elaboration of basic requirements to an assessment of hydrocarbons which are accounted in the state balance, and a making-up of the cadastre of oil and gas promising facilities of Ukraine according to new classification.

Carrying out of measures on comprehensive environmental cleaning of the Azov-Black Sea water areas (coastal waters of the Gulf of Feodosia) from pollution, with their subsequent ecological certification.

Carrying out the exploratory 2D seismic operations in a northwest extreme edge of Donbass in volume of 302 linear km; Processing and interpretation of 302 linear km of 2D seismic data.

Carrying out the seismic investigations using 2D CDP technology (in-line and broadside profiling) in amount of 505 linear km, and the 3D CDP technology – in amount of 125 sq km in a northwest part of a Dnieper-Donets depression of Ukraine; processing and interpretation of 505 linear km and 125 sq km of seismic data – 2D CDP method and 3D CDP method, accordingly.

Elaboration of the first concept of energy security of Ukraine (oil and gas) for the Government of Ukraine.

Development and implementation of the programme of supplying industrial output and geological-geophysical services to subsidiary enterprises of the JSC «Ukrhazprom» in payment for transit of Russian natural gas.

Development of methodical principles of the implementing a dipmeter logging (determining an angle of incidence of formations) (Dipmeter/DipLog) and a sonic waveform logging (Full Wave Sonic/LSS).

Implementation of projects in Egypt:

• Acquisition and analysis of the additional information on a resource evaluation of selected promising structures of Egypt and forecasting of economic indicators of their development.

Information support of operative activity in the Near East and North Africa.

Performance of two projects in Iran:

• Processing of the primary geological-geophysical information on prospective oil and gas bearing facilities for the purpose estimations of hydrocarbonic potential and expediency of investment in their development.
• Determination of the main technical and economic indexes of development of the blocks Kuhdasht and Khoramabad in Iran.

Performance of two projects in Pakistan:

• Economic-geological evaluation of the oil and gas promising blocks in Pakistan.
• Processing and interpretation of 43 linear km of 2D seismic data of oil and gas bearing blocks in Pakistan.

Project performance in Iraq:

• Processing of the primary geological-geophysical information of prospective oil and gas bearing facilities in Iraq to assess the hydrocarbon potential and expediency of investment in their development.

Performance of seven projects in Libya:

• Analysing oil and gas potential of the basins and blocks.
• Processing and detailed analysis of the geological and geophysical information on oil and gas bearing facilities in Libya to assess the hydrocarbon potential and expediency of investment in their development.
• Choice of the free oil and gas promising blocks in Libya.
• Evaluation of oil and gas producing potentials within the Sirt basin.
• Performance of an expert estimation of seismic survey materials for free oil and gas promising blocks in Libya, selected for detailed study.
• Calculation of forecasted economic indicators of exploration and development of oil and gas bearing blocks in Libya.
• Determination of geological and economic feasibility of investments into promising blocks of Libya.

Performance of eight projects in Algeria:

• Geological and economic evaluation of promising blocks in Algeria.
• Preparation of materials of the geological and evaluation economic of expediency of investment in exploration and development of oil-promising facilities in Algeria (Constantine pool).
• Acquisition, analysis and processing of the geological and geophysical information and modelling of hydrocarbon reserves of the oil and gas promising blocks of Illizi and Ouargla bassins in Republic of Algeria etc.
• Processing and interpretation of 1427 linear km of CDP method 2D seismic data.

Performance of three projects in the Russian Federation:

• Preparation of materials for an expert estimation of design parameters during an estimation of reserves of fields of the RF (Kolganskoye and others.) etc.

Performance of two projects in Syria:

• Processing and detailed analysis of the geological and geophysical information on oil and gas bearing facilities in Syria to assess the hydrocarbon potential and expediency of investment in their development
• Evaluation of oil and gas bearing blocks of Syria.

Preparation of the geological and geophysical information of 126 oil and gas fields for the international audit of hydrocarbon reserves.

Construction of integrated geological model of productive strata for oil and gas in the eastern part of Black Sea.

Project performance in the United Arab Emirates – «Assessment of predicted extraction volumes and costs for carrying out of geological and economic evaluation of prospective structures on the UAE territories» (2006.).

Conducting 2D seismic surveys using CDP method in amounts of 1097 linear km in northern and eastern oil and gas bearing regions of Ukraine (4 areas: Kobzivska (2006), Hadiatska (2007), the area of the Tunivska group of structures in a northwest part of the DDB (2009), Slovianoserbska (2011)); processing and interpretation of 1097 linear km of CDP method 2D seismic data.

Carrying out of 3D seismic investigations in amounts of 2600 sq km on the territory of Ukraine (11 areas: Kobzivska, Bilska (2006), Pivnichno-Yablunivska, Skhidno-Vynohradivska, Mashivska (2007), Zakhidno-Solokhivska (2008), Yablunivska, Nuriivsko-Maksalska, Bakiiska, Matviivska, Budyshchansko-Chutivska (2011)); Processing and interpretation of 2600 sq km of 3D seismic data. Creation of geological model of the explored areas according to the 3D data of seismic surveys.

Increase in the growth index of the total prognostic reserves by 30 bln cubic m of gas (at the expense of detailed study of a geological structure of the identified areas).

Construction and publication of a geological map of the Ukrainian Carpathians in scale of 1:100 000.

Determination of the priority oil and gas promising facilities within northern borderlands of Donbass and transitive and shallow water zones in the southern Ukraine.

Elaboration of technique of the integration of new methods of geophysical research of wells.

Carrying out high-precision gravimetric and magnetometer surveys in oil and gas region of eastern Ukraine (Budyshchansko-Chutivska area).

Creation of permanent geological and hydrodynamic models of hydrocarbon deposits based on results of detailed high-resolution 3D seismic surveys and re-interpretations of data from wells by means of the modern software packages.

Systematisation, analysis and generalisation of results of seismic work and materials of geophysical well surveys (GIS) for the purpose substantiations of calculation parameters of natural hydrocarbon reserves.

Creation of the integral model of distribution of vertical velocities of seismic waves in the central part of a Dnieper-Donets depression of Ukraine.

Drawing up of more than 100 passports of oil and gas promising facilities, prepared for deep drilling.

Carrying out of seismic exploration works using 2D-technique (in-line and broadside profiling) and 2D CDP method in amounts of 6683 linear km in oil and gas bearing region of eastern Ukraine (8 areas: Orilska (2003), Pivnichno-Volvenkivska (2004), Novoselivska (2005), Zakhidno-Kharkivska (2006), Zakhidno-Olkhivska (2011), Pavlivsko-Svitlivska (2012), Hrakivska, Olkhivska (2013)); Processing and interpretation of 6683 linear km of 2D seismic data.

Carrying out of seismic exploration works in amounts of 633 sq km in oil and gas bearing region of eastern Ukraine (5 areas: Bohatoiska, Sentianivska (2004), Krasnokutska (2010), Myhrynska, Drobyshivska (2011)); Processing and interpretation of 633 sq km of 3D seismic data.

Increase in the growth index of the total prognostic reserves by 40 bln cubic m of gas (at the expense of detailed study of a geological structure of the identified areas).

Performance of economic-geological evaluation of hydrocarbon reserves of fields of oil and gas bearing regions of eastern Ukraine (Yablunivske, Zachepylivske fields).

Performance of re-processing and re-interpretation of the seismic survey data from previous years taking into account results of drilling on fields of oil and gas regions of eastern Ukraine (Bohatoiske, Vynohradivsko-Skhidno-Novoselivska group of deposits).

Manufacturing and delivery of six rigs for the workover (AORS-40, AORS-60, AORS-80).

Manufacturing and delivery of the reverse-acting valves and core breakers and logging winch.

Carrying out of comprehensive research in open holes more than 300 oil and gas wells.

Carrying out of comprehensive research in open holes of more than 200 production wells.

Carrying out of perforation in more than 200 oil and gas boreholes.

Performing the 27 integrated projects of a borehole seismic surveys

Manufacturing and delivery of multisonde software and hardware system of long-wave acoustic surveys (Array Sonic/AS LSS) to monitor a conducting of hydraulic fracturing.

Manufacturing and delivery of five heat-pressure resistant analogue complete sets of the borehole instrumentation for investigation of an open hole of oil and gas boreholes.

Elaboration and implementation of the multicyclic formation tester on pipes (Drill Steam Test/DST).

Manufacturing and delivery of five heat-pressure resistant digital complete sets of the borehole instrumentation for investigation of an open hole of oil and gas boreholes, six complete sets of a radioactivity logging equipment for investigation of the closed barrel of oil and gas boreholes, five complete sets of plants for geological-technical bore-hole surveys (Mud-logging).

Manufacturing and delivery of spare parts for the downhole instrumentation.

Manufacturing and delivery of tubing perforators.

Manufacturing and delivery of mobile housing units of various type.

Manufacturing and delivery of 26 rigs for the workover (AORS-40, AORS-60, AORS-80).

Carrying out of 2D seismic surveys on 5 areas (320 sq km); processing and interpretation of 2D seismic data.

Carrying out of seismic investigations on technique of 3D-survey and under the methodology of tablet survey 3D within oil and gas regions of eastern Ukraine – Zakhidno-Vilshansko-Reshetniakivska group of structures (2000), Artiukhivske oil-condensate deposit (2012); processing and interpretation of 3D seismic data.

Drawing up the seven passports of oil and gas promising facilities, prepared for deep drilling.

Manufacturing and delivery of more than 40 mobile housing units.

Manufacturing and delivery of the reverse-acting valves and core breakers.

Carrying out of dipmeter logging (determining an angle of incidence of formations) (Dipmeter/DipLog) and sonic waveform logging (Full Wave Sonic/LSS).

Carrying out of integrated geophysical explorations in open holes more in than 100 oil and gas exploration wells and 50 production ones, including those on marine drilling platforms.

Carrying out of perforating works in more than 50 wells.

Manufacturing and delivery of a drilling rig (model: MOD700D-M-W) with a lifting capacity of 125 tons to work on fixed offshore platforms.

Manufacturing and delivery of four rigs for the workover (AORS-60).

Performance of the project of diagnostic study of pipelines and ensuring operate reliability of pipelines for the prevention of emergencies and accidents on them and for environmental protection.

Creation of permanent geological and hydrodynamic models of underground storages of gas and carrying out of field 2D seismic surveys.

Manufacture and delivery of the geophysical equipment and lubricators.

Project performance «Determining the conditions of formation of sedimentary basins and prospects for the revealing new oil and gas complexes of Ukraine».

Conducting field 3D seismic surveys in amounts of 32 sq km using a plane-table survey method.

Processing and interpretation of 32 sq km of 3D seismic data.

Conducting a package of geophysical explorations in open holes of more than 10 oil and gas boreholes and perforation work in more than 10 wells.

Conducting perforating operations in more than 10 wells.

Manufacturing and delivery of the stationary drilling rigs (model: SL2500T-AC-T) with a lifting capacity of 600 tons.

Manufacturing and delivery of the mobile drilling rig (model: CA700D-M-W) with a lifting capacity of 125 tons.

Conducting a package of geophysical explorations in open holes of more than 10 oil and gas boreholes and perforation work in more than 10 wells.

Carrying out of 3D seismic surveys in amounts of 21 sq km in the oil and gas regions of western Ukraine (Stynava area); processing and interpretation of 21 sq km of 3D seismic data.

Performance of the project of marine borehole seismic survey on an Azov Sea shelf.

Conducting a package of geophysical explorations in open holes of more than 10 oil and gas boreholes and perforation work in more than 10 wells.

Conducting a package of geophysical explorations in open holes of more than 10 oil and gas boreholes and perforation work in more than 10 wells.

Conducting field 3D seismic surveys in amounts of 123 sq km in Eastern oil and gas region of Ukraine (Krasnozaiarska area); Processing and interpretation of 123 sq km of 3D seismic data.

Providing services in carrying out of seismic surveys in wells.

Conducting geophysical explorations in open holes of more than 20 oil and gas boreholes and perforation work in more than 20 wells.

Manufacture and delivery of the complete sets of downhole geophysical instrumentation for the investigation of open and closed hole of oil and gas wells, and also spare parts for the borehole instrumentation.